Drywall Installation in Lynnwood WA - Smooth Walls That Last

Most people call us when a wall is already open. A remodel, an addition, or a basement finish all start with bare studs. Those studs need new drywall before anyone can paint. That is the simple case.

The harder case is water. Rain and damp air in the Pacific Northwest get into walls more than most people think. Drywall that stays wet goes soft, turns yellow or brown, and can grow mold. If you press on a wall and it feels spongy, that board is done. Paint will only hide it for a few months.

Older homes in Lynnwood and Edmonds bring their own problems. Some still have old plaster or thin board that cracks along every seam. Past repairs may be patched in layers. Sometimes the wall is so uneven that new board is the cleaner fix.

Here are other signs it is time. Nail pops keep coming back. A big crack runs across the ceiling. There are holes left from old plumbing or wiring work. A ceiling panel sags. Please do not wait on a sagging ceiling, because it can come down.

Not sure if a wall can be patched or needs to be replaced? We will come look. Some walls only need a repair, and we will say so. We do not sell a bigger job than you need.

We start with a free estimate. We walk the space, check the framing, and look for moisture. If a wall is damp, we find the source first. New board over a leak is just a new leak.

Next comes the plan. We measure each wall and ceiling, pick the right board, and write up an itemized quote. Bathrooms and basements get moisture resistant board. Garage walls shared with the house may need fire rated board, so we check that too. If your project needs a permit, we handle it in-house. Rules differ between Snohomish and King County, so we pull the right paperwork for your address.

Then we protect your home. We cover floors, seal off doorways, and set up so dust stays in one area. Drywall dust gets everywhere if nobody plans for it.

Hanging is next. We cut the sheets to fit, set them tight against the framing, and screw them down on every stud. Screws hold better than nails and cut down on nail pops later. We stagger the seams so they do not line up and crack.

Then comes the part that makes or breaks the look. We tape every seam, then spread joint compound over the tape and screw heads. Joint compound is the thick paste that hides the seams. It goes on in several thin coats, and each coat has to dry before the next. We sand between coats until the wall feels smooth under your hand.

We can match a texture if your ceiling or walls have one. Then the wall is ready for primer and paint. We clean up every day, bag the scraps, and haul away the debris at the end. Last, we walk the job with you. Look at the walls with the lights on and again from the side, because side light shows flaws. If you see anything you do not like, tell us. We fix it before we call the job done.

We will not throw out a number over the phone and hope it sticks. Drywall jobs vary too much for that. We look at your space first, and the estimate is free. There is no trip fee.

Here is what moves the price. Size matters most, since more wall and ceiling means more board and more hours. Ceiling work costs more than wall work because the sheets are heavy and awkward. High ceilings need extra staging. The type of board changes things too, like moisture resistant or fire rated sheets.

Finish level is a big one. A wall that will be painted flat needs less work than one under bright light or a glossy paint. Texture matching adds time. So does tearing out old damaged board, or fixing the framing behind it. Water damage can mean more demo and a dry out before we start.

Old homes can add surprises. Walls in older Lynnwood houses are often not square, so we may have to shim or shave framing to get a flat face. We tell you about that at the estimate when we can spot it.

Access counts as well. A bare room is faster than one full of furniture. Permits can add a step on larger projects.

You get an itemized quote up front, in writing. Every line is listed, so you can see what you are paying for. No hidden fees show up later. If something changes on the job, we talk to you before we do the work, not after.

Plenty of folks have been burned by a contractor who stopped answering the phone. We run the other way. When you call, we usually reply in about 30 minutes. You deal with one person from the first call to the last day.

JE Remodeling Solutions is family owned and based right here in the Lynnwood area. John Eric Fernandez has over 25 years of hands-on experience, and his father taught him the trade. We are a licensed Washington State general contractor, and we are bonded and insured. That protects you if something goes wrong.

We handle permits in-house, so you are not stuck at the county office. We work in Lynnwood, Bothell, Seattle, Edmonds, Mountlake Terrace, Shoreline, Kenmore, Lake Forest Park, Woodinville, Kirkland, and Everett.

If something is not right after we finish, we make it right. That is our workmanship guarantee. We also keep our word on timing. We tell you the plan and the order of work, so you are never left guessing when the crew will show up next. And we clean up. Dust, scraps, and old board leave with us.